Printing, Copying, and Scanning
Solutions
Copying and Scanning
How to scan and
send figures from BEG copier
Printing
at UTIG - instructions from
the sysadmins and driver downloads
Print server is \\igdrasil.ig.utexas.edu\
Printing directly
to copiers
Copy codes
Printing From
Landmark
1. Screen
capture from SeisWorks into Illustrator
2. Print directly from Landmark using File -> Scaled Plot
Here you have two options; 1) print to a plotter, either on
the 2nd or 3rd floor or 2) print to a .cgm file.
If you print to a .cgm from this option, you can not bring
it into Illustrator (Illustrator does not accept cgm+ files)
to manipulate it. UTIG does have a program from Larson
that will do a format exchange (cgm+ -> pdf). Talk with
UTIG tech support to access that program to convert
your cgm+ file.
Printing From
Geolog
You have two options when printing from Geolog. You can either
1) print to a file (.cgm), bring it into Illustrator to manipulate
it and print it from that program, or 2) you can print your
screen straight from Geolog to a printer (Layout -> Plot,
then select the printer (hp2-116.plotter or hp2-116_scale.plotter).
The "scale" option will scale the image to fit on
an 8.5"x11" piece of paper, the other option will
print as you see it on the screen (see the grey box at the
bottom of the Geolog screen to see how big your plot actually
is (PLOT SIZE: 29.25 x 29.85 (CM)). It may print on multiple
pages. You can choose between four printers/plotters:
1. B/W in the 2.116 area (8.5"x11")
2. Color in the 2.112 room (8.5"x11")
3. Color plotter on the 2nd floor
4. Color plotter on the 3rd floor
